Base cabinets
KR3
Cabinet Door & Frame
Doors are made using 18mm MRMDF for stability.
Cabinet frames are manufactured using Beech.
Hinges
Concealed adjustable hinges with integrated soft close
Carcase material & construction 18mm Melamine faced panels are CNC pre-drilled then assembled using Confirmat screws. There is a 32mm service void to the rear.
Cabinet Dimensions
Height:
The standard height for all framed base cabinets is 870mm from the floor to the top of the cabinet (including adjustable legs).
The overall height is adjustable -50mm +10mm (see below).
Depth:
The standard depth for framed base cabinets is 578mm from the front of the door / frame to the back edge of the cabinet.
Width:
The overall widths of the cabinets are shown in the relevant product pages.
Adjustable legs
Base units are supplied with adjustable legs. They are set at 150mm, but have an adjustable range of 100mm – 160mm, which would result in and overall cabinet height varying between 820mm – 880mm.
*with the exception of the Freestanding Appliance housing which does not have a base.