Base Cabinets

KR1

Cabinet Door & Frame

Doors are made using 21mm thick Poplar/Tulipwood with an MDF centre panel. They are constructed using mortice and tenon joints.

Cabinet frames are also manufactured using Poplar/Tulipwood.

Hinges

All of our hinged cabinets use concealed adjustable hinges with integrated soft close.

Carcase material & construction

18mm Melamine faced panels are CNC pre-drilled then assembled using Confirmat screws. There is a 32mm service void to the rear.

Cabinet Dimensions

Height:

The standard height for all framed base cabinets is 870mm from the floor to the top of the cabinet. (including adjustable legs)

The overall height is adjustable -50mm +10mm (see below)

Depth:

The standard depth for framed base cabinets is 581mm from the front of the door / frame to the back edge of the cabinet

Width:

The overall widths of the cabinets are shown in the relevant product pages.

KR1 Base unit Side elevationKR1 Base unit Plan

Adjustable legs

Base units are supplied with adjustable legs. They are set at 150mm, but have an adjustable range of 100mm – 160mm, which would result in and overall cabinet height varying between 820mm – 880mm.