Tall Cabinets

KR3

Cabinet Door & Frame

Doors are made using 18mm MRMDF for stability.

Cabinet frames are manufactured using Poplar/Tulipwood.

Hinges

Concealed adjustable hinges with integrated soft close
Carcase material & construction 18mm Melamine faced panels are CNC pre-drilled then assembled using Confirmat screws. There is a 32mm service void to the rear.

Cabinet Dimensions

Height:

The standard height for all framed base cabinets is 870mm from the floor to the top of the cabinet (including adjustable legs).

The overall height is adjustable -50mm +10mm (see below).

Depth:

The standard depth for framed base cabinets is 578mm from the front of the door / frame to the back edge of the cabinet.

Width:

The overall widths of the cabinets are shown in the relevant product pages.

KR3 Tall unit - Side elevation

Adjustable legs

Base units are supplied with adjustable legs. They are set at 150mm, but have an adjustable range of 100mm – 160mm, which would result in and overall cabinet height varying between 820mm – 880mm.

*with the exception of the Freestanding Appliance housing which does not have a base.